|
Build Your Online Product Catalogs?
Product Name: |
Wireless measuring&control unit series(WI-FI output based)
|
Supply Ability: |
|
Related proudcts |
wireless sensor, |
Specifications |
4-20 mA (optional two-wire system), 0-20mA, 0-5V, 1-5V. |
Price Term: |
|
Port of loading: |
|
Minimum Order |
|
Unit Price: |
|
|
WI-FI output-based wireless measuring&control unit (WN60) is a wireless terminal control product integrating data collection, control and wireless communication functions.One set can simultaneously collect several ways of analog quantity, DI/DO and pulse signal, and output several ways of DI/DO, analog quantity, and pulse signal. Then, it uploads data via WI-FI .Products are widely used in petroleum, chemical, energy, energy conservation, environmental protection, water,processing and manufacturing industry, energy management, data collection, the best choice of the online monitoring system. It is applicable for transmission speed is very fast, large amount of data, transmission distance nearly ideal transmission distance (200 meters), set up the MESH shape sensing network.
Technical parameters for uplink communication: &©|8226;WI-FI technical Parameters: &©|8226;RF band: 2.4-2.497GHZ ISM &©|8226;Safety:64bit/128bit WEP, TKIP,AES¡£ &©|8226; Modulation:DSSS 11Mbps£»OFDM 54Mbps. &©|8226;Ideal transfer distance: 200M. &©|8226;Network architecture: star network. &©|8226;Application layer protocol: MODBUS/RTU. &©|8226;Provide user-designated communication protocol.
Input & output parameters: &©|8226;Maximum 12 ways of AI/DI/DO combinations. &©|8226;Analog quantity: 4-20 mA (optional two-wire system), 0-20mA, 0-5V, 1-5V. Optional sensor input. &©|8226;Analog quantity input isolation: 2.5 KVDC: insulation resistance: 100M¦¸, 500VDC. &©|8226;Analog quantity input precision: 0.1%F.S. &©|8226;DI/DO: dry contact, pulse, input, output. &©|8226;DI/DO input parameter: &©|8226;ESD Protection for Input Pins£º ¡À15kV¡ªHuman Body Model¡£ ¡À8kV¡ªIEC 1000-4-2, Contact Discharge¡£ ¡À15kV¡ªIEC 1000-4-2, Air-Gap Discharge¡£ You can set the anti-jitter time for DI/DO input.
&©|8226;Output contact load: AC250V ,5A; AC250V, DC30V. &©|8226;Input contact parameters: Contact resistance 100m¦¸ or below Action time 10 ms or below Reset time 5 ms or below |
Company: |
SHENZHEN XINLI TECHNOLOGY CO.,LTD
|
Contact: |
Mr. Yiping Wu |
Address: |
B Building 301, Lianchengfa Industrial Park, Road |
Postcode: |
|
Tel: |
18925258336 |
Fax: |
|
E-mail: |
|
|
|
|